Installation Instructions

Document No. 129-393
Installation Instructions
October 2, 2009
Information in this publication is based on current specifications. The company reserves the right to make changes in specifications and
models as design improvements are introduced. Product or company names mentioned herein may be the trademarks of their respective
owners. © 2009 Siemens Industry, Inc.
Siemens Industry, Inc.
Building Technologies Division
1000 Deerfield Parkway
Buffalo Grove, IL 60089
+ 1 847-215-1000
Your feedback is important to us. If you have
comments about this document, please send them
to [e-mail]
.
Document No.129-393
Printed in the U.S.A.
Page 15 of 15
Parameter Description
User
Setting
P2210
Fixed PID setpoint 10
P2211
Fixed PID setpoint 11
P2212
Fixed PID setpoint 12
P2213
Fixed PID setpoint 13
P2214
Fixed PID setpoint 14
P2215
Fixed PID setpoint 15
P2216
Fixed PID setpoint
mode-Bit 0
P2217
Fixed PID setpoint
mode-Bit 1
P2218
Fixed PID setpoint
mode-Bit 2
P2219
Fixed PID setpoint
mode-Bit 3
P2220
BI: Fixed PID setpoint
select Bit 0
P2221
BI: Fixed PID setpoint
select Bit 1
P2222
BI: Fixed PID setpoint
select Bit 2
P2223
BI: Fixed PID setpoint
select Bit 3
r2224
CO: Act. fixed PID
setpoint
P2225
Fixed PID setpoint
mode-Bit 4
P2226
BI: Fixed PID setpoint
select Bit 4
P2227
Fixed PID setpoint
mode-Bit 5
P2228
BI: Fixed PID setpoint
select Bit 5
P2231
Setpoint memory of
PID-motor
potentiometer
Parameter Description
User
Setting
P2232
Inhibit rev. direct. of
PID-motor
potentiometer
P2240
Setpoint of PID-motor
potentiometer
r2250
CO: Output setpoint of
PID-motor
potentiometer
P2253
CI: PID setpoint
P2254
CI: PID trim
P2261
PID setpoint filter
r2262
CO: Act. PID filtered
setpoint
P2264
CI: PID feedback
P2265
PID feedback filter time
constant
P2267
Max. value for PID
feedback
P2268
Min. value for PID
feedback
P2269
Gain applied to PID
feedback
P2270
PID feedback function
selector
P2271
PID transducer type
r2272
CO: PID scaled
feedback
r2273
CO: PID error
P2274
PID derivative time
P2279
PID neutral zone
P2280
PID proportional gain
P2285
PID integral time
P2291
PID output upper limit
Parameter Description
User
Setting
P2292
PID output lower limit
P2293
PID limit ramp time
r2294
CO: Actual PID output
P2303
PID output offset
P2304
PID opening time
P2305
PID closing time
P2306
PID actuator direction
P2370
Selection of motor
staging stop mode
P2371
Selection of external
motor configuration
P2372
Enable motor cycling
P2373
Motor staging
hysteresis
P2374
Motor staging delay
P2375
Motor de-staging delay
P2376
Delay override
P2377
Delay override lockout
timer
P2378
Staging frequency f,
%fMax
r2379
CO/BO: Status of
motor staging
P2380
Motor hours run
P2390
Hibernation frequency
P2391
Hibernation timer
P2392
Restart frequency
P3900
End of quick
commissioning