Installation Instructions

Document No. 129-393
Installation Instructions
October 2, 2009
Siemens Industry, Inc. Page 7 of 15
Figure 19. Removing Terminal Cover.
3. Detach the operator panel extension module
(Figure 20).
Do not disconnect ribbon cable.
Insert extension module where operator panel
was located.
Figure 20. Removing Operator Panel
Extension Module.
4. Detach I/O module (Figure 21). Allow I/O
module to rest beneath SED2 (Figure 22).
Figure 21. Detaching I/O Module.
Figure 22. Resting I/O Module Beneath SED2.