Operating Instructions

Appendix A: Parameter Reference List
Siemens Building Technologies, Inc. 117
Parameter Description Unit
User
Setting
Min Default Max
Access
Level
P2189 Upper torque threshold
3
Nm 0.0 99999.0 99999.0 2
P2190 Lower torque threshold
3
Nm 0.0 0.0 99999.0 2
P2191 Belt failure speed
tolerance
Hz 0.00 3.00 20.00 2
P2192 Time delay for belt
failure
s 0 10 65 2
r2197 CO/BO: Monitoring
word 1
- - - - 2
r2198 CO/BO: Monitoring
word 2
- - - - 2
PI Controller (P0004=22)
Parameter Description Unit
User
Setting
Min Default Max
Access
Level
r0000 Drive display (defined
in P0005)
- - - - X
P0003 User access level to
parameters
- 0 1 4 1
P0004 Parameter filter - 0 0 22 1
P0010 Commissioning
parameter filter
- 0 0 30 1
P2200 BI: Enable PID
controller
- 0:0 0:0 4000:0 2
P2201 Fixed PID setpoint 1 % -200.00 0.00 200.00 2
P2202 Fixed PID setpoint 2 % -200.00 200.00 2
P2203 Fixed PID setpoint 3 % -200.00 200.00 2
P2204 Fixed PID setpoint 4 % -200.00 200.00 2
P2205 Fixed PID setpoint 5 % -200.00 200.00 2