Operating Instructions

SED2 VFD Operation & Maintenance Manual
4 Siemens Building Technologies, Inc.
Repair
Only Siemens service departments, repair centers authorized by Siemens Building
Technologies, or authorized personnel who are fully acquainted with the SED2 may repair
this equipment. Replace defective parts or components using original manufacturer parts.
DANGER:
Always disconnect the power source before opening the SED2.
Environmental Compatibility and Disposal
The SED2 drives are developed and manufactured using materials and processes which
take full account of environmental issues and which comply with environmental standards.
For disposal at the end of the SED2 drive service life or in the event of its replacement, note
the following:
• For disposal purposes, this product is defined as waste derived from electrical and
electronic equipment (“electronic waste”) and must not be disposed of as household
waste. This applies particularly to the PCB assembly.
• Always use the most environmentally compatible method of disposal, in line with the
latest developments in environmental protection, recycling, and waste management.
Observe all local legislation and applicable laws.
• Always aim for maximum re-use of the basic materials, and minimum environmental
stress. Observe any notes about materials and disposal that may be attached to
individual components.
• Use local depots and waste management companies, or See your supplier or
manufacturer to return used products or to obtain further information on
environmental compatibility and waste disposal.
• Special handling of components such as electrolytic capacitors and LCD panels may
in some cases be compulsory by law or environmentally desirable.
• The SED2 is delivered in re-usable packaging. Please retain the packaging for later
use or in case you need to return the product to the manufacturer.