Operating Instructions

Appendix C: Electrical Installation
Siemens Building Technologies, Inc. 177
5192J10
1
L1
L2
L3
2
6
3
4
5
1. Incoming mains cable
2. Control cable
3. Motor cable
4. Footprint filter
5. Metal backplate
6. Use suitable cable clamps to
ensure good conductive contact
between the shield of the motor
and control cables and the
metal backplate.
7. Connect the motor cable shield
to
.
Figure 42. Cable Routing for SED2 Frame Size A with Footprint Filter.
7