Specifications

Glossary
Siemens Building Technologies, Inc. 119
NEMA Type 12/IP54
IP54 is a European enclosure rating; there is no equivalent North
American rating, although it exceed the NEMA Type 12 rating. An
enclosure with a NEMA Type 12 rating is intended for indoor use,
primarily to provide a degree of protection against dust, falling dirt, and
dripping non-corrosive liquids. An enclosure with an IP54 rating is
protected against dust (limited ingress, no harmful deposit) and it is
protected against water sprayed from all directions (limited ingress
permitted).
OFF1
The OFF1 command stops the SED2 within the selected ramp-down
time (P1121).
OFF2
The OFF2 command causes a free coasting of the motor to a standstill
(impulses for the power section of the SED2 are disabled).
OFF3
The OFF3 command causes the motor to decelerate rapidly.
Overcurrent
A SED2 fault condition that occurs, for example, when motor power is
greater than SED2 power. Also see Fault Code F0001.
Overvoltage
A SED2 fault condition that occurs, for example, when the input line
power is too high or if the motor is in regenerative mode (caused by fast
ramp downs or if the motor id drive from an active load). Also see Fault
Code F0002.
Parameter Filter
Functional categories of parameters that are available to a user. Also
see Parameter Filter P0004.