Specifications

SED2 VFD Startup, Operation, and Maintenance Manual
4 Siemens Building Technologies, Inc.
Environmental Compatibility and
Disposal
The SED2s are developed and manufactured using materials and
processes that take full account of environmental issues and which
comply with environmental standards. For disposal at the end of the
SED2 service life or in the event of its replacement, note the following:
• For disposal purposes, this product is defined as waste derived from
electrical and electronic equipment (“electronic waste”) and must not
be disposed of as household waste. This applies particularly to the
PCB assembly.
• Always use the most environmentally compatible method of disposal,
in line with the latest developments in environmental protection,
recycling, and waste management. Observe all local legislation and
applicable laws.
• Always aim for maximum re-use of the basic materials, and minimum
environmental stress. Observe any notes about materials and
disposal that may be attached to individual components.
• Use local depots and waste management companies, or see your
supplier or manufacturer to return used products or to obtain further
information on environmental compatibility and waste disposal.
• Special handling of components such as electrolytic capacitors and
LCD panels may in some cases be compulsory by law or
environmentally desirable.
• The SED2 is delivered in re-usable packaging. Please retain this
packaging for later use or in case you need to return the product.