Manualshelf

Technical data

ManualsBrandsSiemens ManualsMonitorSED2
101102103104105106107108109110
Appendix A: Parameter Reference List
Siemens Building Technologies, Inc. 95
Parameter
Description Unit
User
Setting
Min Default Max
Access
Level
P1120 Ramp-up time s 0.00 10.00 650.00 1
P1121 Ramp-down time s 0.00 10.00 650.00 1
P1135 OFF3 ramp-down time s 0.00 5.00 650.00 2
Drive Features (P0004=12)
Parameter
Description Unit
User
Setting
Min Default Max
Access
Level
r0000 Drive display (defined in
P0005)
- - - - X
P0003 User access level to
parameters
- 0 1 4 1
P0004 Parameter filter - 0 0 22 1
P0005 Display selection for r0000 - 2 21 2294 2
P0006 Display mode for r0000 - 0 2 4 3
P0010 Commissioning parameter
filter
- 0 0 30 1
P0011 Lock for user-defined
parameter
- 0 0 65535 3
P0012 Key for user-defined
parameter
- 0 0 65535 3
P0013 User-defined parameter - 0 0 65535 3
P1200 Flying start - 0 0 6 2
P1202 Motor-current: Flying start % 50 100 200 3
P1203 Search rate: Flying start % 50 100 200 3
P1210 Automatic restart - 0 1 5 2
P1211 Number of restart attempts - 0 3 10 3
P1212 Time to first restart s 0 30 1000 2
P1213 Restart time increment s 0 30 1000 2
P1232 DC braking current % 0 100 250 2
P1233 Duration of DC braking s 0 0 250 2
P1236 Compound braking current % 0 0 250 2
P1240 Configuration of Vdc controller
- 0 1 3 3
P1260 Source of changeover - 0 0 7 2
P1261 Contactor control word - - - - 2
P1262 Bypass dead time - 0 1.000 20.000 2
P1263 De-bypass time - 0 1.000 300.0 2
P1264 Bypass time - 0 1.0 300.0 2
P1265 Mains frequency - 12.00 50.0 650.0 2
P1266 Bypass command - 0:0 0:0 4000.0 2
Motor Control (P0004=13)
Parameter
Description Unit
User
Setting
Min Default Max
Access
Level
r0000 Drive display (defined in
P0005)
- - - - X
P0003 User access level to
parameters
- 0 1 4 1
P0004 Parameter filter - 0 0 22 1
P0010 Commissioning parameter
filter
- 0 0 30 1
r0020 CO: Act. frequency setpoint Hz - - - 3
r0021 CO: Act. frequency Hz - - - 2
r0022 Act. Rotor speed 1/min - - - 3
r0024 CO: Act. output frequency Hz - - - 3
r0025 CO: Act. output voltage V - - - 2
r0027 CO: Act. output current A - - - 2
r0031 Actual torque - - - - 3