Technical data

Appendix A: Parameter Reference List
Siemens Building Technologies, Inc. 97
Parameter Description Unit
User
Setting
Min Default Max
Access
Level
P0952 Total number of faults - 0 0 0 3
P2100 Alarm number selection - 0 0 65535 3
P2101 Stop reaction value - 0 0 4 3
r2110 Warning number - - - - 2
P2111 Total number of warnings - 0 0 4 3
r2114 Run time counter - - - - 3
P2115 AOP real time clock - 0 0 65535 3
P2181 Belt failure detection mode - 0 0 6 2
P2182 Belt threshold frequency 1 Hz 0.00 5.00 650.00 3
P2183 Belt threshold frequency 2 Hz 0.00 30.00 650.00 2
P2184 Belt threshold frequency 3 Hz 0.00 50.00 650.00 2
P2185 Upper torque threshold 1 Nm 0.0 99999.0 99999.0 2
P2186 Lower torque threshold 1 Nm 0.0 0.0 99999.0 2
P2187 Upper torque threshold 2 Nm 0.0 99999.0 99999.0 2
P2188 Lower torque threshold 2 Nm 0.0 0.0 99999.0 2
P2189 Upper torque threshold 3 Nm 0.0 99999.0 99999.0 2
P2190 Lower torque threshold 3 Nm 0.0 0.0 99999.0 2
P2191 Belt failure speed tolerance Hz 0.00 3.00 20.00 2
P2192 Time delay for belt failure s 0 10 65 2
r2197 CO/BO: Monitoring word 1 - - - - 2
r2198 CO/BO: Monitoring word 2 - - - - 2
PI Controller (P0004=22)
Parameter Description Unit
User
Setting
Min Default Max
Access
Level
r0000 Drive display (defined in
P0005)
- - - - X
P0003 User access level to
parameters
- 0 1 4 1
P0004 Parameter filter - 0 0 22 1
P0010 Commissioning parameter
filter
- 0 0 30 1
P2200 BI: Enable PID controller - 0:0 0:0 4000:0 2
P2201 Fixed PID setpoint 1 % -200.00 0.00 200.00 2
P2202 Fixed PID setpoint 2 % -200.00 200.00 2
P2203 Fixed PID setpoint 3 % -200.00 200.00 2
P2204 Fixed PID setpoint 4 % -200.00 200.00 2
P2205 Fixed PID setpoint 5 % -200.00 200.00 2
P2206 Fixed PID setpoint 6 % -200.00 200.00 2
P2207 Fixed PID setpoint 7 % -200.00 200.00 2
P2208 Fixed PID setpoint 8 % -200.00 200.00 2
P2209 Fixed PID setpoint 9 % -200.00 200.00 2
P2210 Fixed PID setpoint 10 % -200.00 200.00 2
P2211 Fixed PID setpoint 11 % -200.00 200.00 2
P2212 Fixed PID setpoint 12 % -200.00 200.00 2
P2213 Fixed PID setpoint 13 % -200.00 200.00 2
P2214 Fixed PID setpoint 14 % -200.00 200.00 2
P2215 Fixed PID setpoint 15 % -200.00 200.00 2
P2216 Fixed PID setpoint mode-Bit 0 - 1 1 3 3
P2217 Fixed PID setpoint mode-Bit 1 - 1 1 3 3
P2218 Fixed PID setpoint mode-Bit 2 - 1 1 3 3
P2219 Fixed PID setpoint mode-Bit 3 - 1 1 3 3
r2224 CO: Act. fixed PID setpoint % - - - 2
P2225 Fixed PID setpoint mode-Bit 4 - 1 1 3 3
P2227 Fixed PID setpoint mode-Bit 5 - 1 1 3 3
P2231 Setpoint memory of PID-MOP - 0 0 1 2
P2232 Inhibit rev. direct. of PID-MOP - 0 1 1 2