Technical data

Chapter 2 – Electrical Installation
Siemens Building Technologies, Inc. 133
5192J10
1
L1
L2
L3
2
6
3
4
5
1. Incoming mains cable
2. Control cable
3. Motor cable
4. Footprint filter
5. Metal backplate
6. Use suitable cable clamps
to ensure good conductive
contact between the shield
of the motor and control
cables and the metal
backplate.
7. Connect the motor cable
shield
to
.
Figure 4. Cable Routing for SED2 Frame Size A with Footprint Filter.
Shield connected
with tube clips
Motor cable
Incoming mains voltage
5192J21us
Figure 5. Cable Routing for SED2 (IP20) Frame Size D through F with EMC Filter.
7