Data Sheet for Product
s Industry, Inc.
Building Technologies Division
Specifications – (continued)
– Strobe portion of each appliance produces a flash rate of one (1) flash per second,
and has a Xenon flashtube enclosed in a rugged Lexan® lens
– Strobe are of low-current design
– The strobes do not drift out of synchronization at any time during operation
– Speaker and speaker / strobe appliances are designed for indoor and outdoor surface or flush mount
– Weatherproof (single-candela) models are available with the following ratings:
30/180cd (ceiling or wall mount), per UL 1971
115cd (ceiling or wall mount), per
UL 1638
177cd (ceiling-only mount) per UL 1971
75cd (ceiling-only mount), per
UL 1638
185cd (wall-only mount), per UL 1971
90cd (wall-only mount), per
UL 1638
– Ceiling-mount models are available with field-selectable Candela settings of
15/30/75/95cd or 115/177cd
– Wall-mount models are available with field-selectable Candela settings of
15/30/75/110cd or 135/185cd
– All speaker models have a listed sound output of up to 93dB at 10 feet,
and a listed frequency response of 400 to 4000Hz
– All inputs employ terminals that accept
#
12 to
#
18 AWG wire sizes
– Speaker and speaker / strobe incorporate a speaker-mounting plate with a grille cover,
which is secured with two screws for a level finish
Grille cover mounts to standard electrical hardware requiring no additional trim plate or adapter
– The finish of the Series SET speakers and speakers strobes is available in either white or red
– All speaker and speaker / strobe appliances are listed for Special Applications:
Strobes are designed to flash at 1-flash-per-second minimum over their “Regulated Input Voltage Range”
Note
: NFPA-72 specifies a flash rate of 1-to-2 flashes per second,
and ADA Guidelines specify a flash rate of 1-to-3 flashes per second
All candela ratings represent minimum-effective Strobe intensity, based on UL Standard 1971
Mounting Diagram
Mounting Options
(Shown
I
n
I
nches)