Operating instructions

Connecting

6-44

SICLOCK

TC400

24 V voltage signal – high-resistance receiver (greater than 1.2 kOhm)

A high-resistance receiver can also be connected dir

ectly. The output then func-

tions as a 24 V voltage output.

Connection as in Fig. 6-6.

RS422

An RS422 interface is available at OUTPUT 3

for a high-precision point-to-point

connection. The connection is made as shown in Fig. 6-7.

Figure 6-7 OUTPUT 3 RS422

Table 6-4 OUTPUT 3 terminals

Terminal Designation

5OUTPUT 3A

6OUTPUT 3B

RS422