Operating instructions

Configuration Tool

7-54

SICLOCK

TC400

7.2.2 Authorization

There are authorization levels for each parameter, which permit or prohibit read

and write access to the parameter. The user interface starts with the lowest autho-

rization level, which usually only permits read access to parameters.

More rights can be obtained by entering the appropriate password.

The password can be changed by the user:

• /System/Authorization For Standard Protection (2.06.02)

parameter

As delivered, the password on the device is "2222"

The current authorization level is indicated by the color of the password field.

Write protection - red entry field

At this authorization level, the user

typically only has read access to standard

parameters.

Standard protection - green entry field

At this authorization level, the user typically also has read access to advanced

parameter

s and write access to standard parameters.

Online mode

Authorization is performed directly on the device

, i.e. the device assigns an

appropriate authorization level.

Offline mode

You can authorize yourself for a higher authorization level with a password, when

this is co

ntained in the loaded offline authorization parameters.

Note

The combination "0000" is not permitted as a password. Setting the password to

"0000" disables access with this authorization level. Access is then only possible

using the service password. The service password can be requested from Tech-

nical Assistance by an authorized person.

Note

It is not possible to authorize yourself in offline mode with a password that is avail-

able on the device, but is not contained in the offline authorization parameters.