Technical data

Configuring time synchronization
5.2 Setting the time displayed
Time synchronization (V7.1)
Function Manual, 03/2009, A5E01216578-01
51
5.2 Setting the time displayed
5.2.1 How to configure the operator station display
Introduction
You configure the time display for the operator station process mode on the engineering
station. You can select the "Local time zone", for example, in the "Time base for time display
in runtime" parameter.
Requirement
● You must configure the time display on the engineering station before you load the OS.
Procedure
1. Select the "[Computer name]" object from the tree view in WinCC Explorer.
The detail view displays the corresponding computer.
2. Select the "[Name of computer]" object in the detail view.
3. Select Edit > Properties.
The "Computer properties" dialog box opens.