Technical data

Configuring time synchronization
5.5 Configuring the time synchronization of the OS
Time synchronization (V7.1)
76 Function Manual, 03/2009, A5E01216578-01
3. Select Open from the shortcut menu.
The "Time Synchronization" dialog box opens.
4. Select the "Synchronization via terminal bus (slave)" check box.
5. Select the "Accept time from permanently defined computers" check box and enter the
name of the computer with the DCF/GPS receiver under "Computer 1".
6. Select the "Synchronization via plant bus (master, slave)" check box.
7. Select the option button "Display symbolic names of the access points".
8. Select the communications processor ("CP 1613" or "CP 1623") from the "Access point 1"
drop-down list box and activate the "Master" option button.
9. Select "<None>" from the "Access point 2" drop-down list box.
10. Click "OK".