Technical data

Configuring time synchronization

5.5 Configuring the time synchronization of the OS

Time synchronization (V7.1)

Function Manual, 03/2009, A5E01216578-01

8. Select the check box "Display symbolic names of the access points". This will display the

communication modules of the OS server with symbolic names, if they are not available

on the engineering station.

9. Select the CP you parameterized for time synchronization from the "Access point 1" drop-

down list box.

10. Activate the "Master" option button.

11. If using a redundant CP, select the required CP from the "Access point 2" drop-down list

box.

12. Activate the associated "Master" option button (default setting).

13. Click "OK".

Perform these steps for every OS server that you wish to synchronize.