Technical data

Configuring time synchronization
5.6 Configuring time synchronization for a PC station without OS
Time synchronization (V7.1)
Function Manual, 03/2009, A5E01216578-01
93
5.6.2 How to make DCF 77 Client Service settings on a PC station without OS
Introduction
If no operator station is being used on a PC station in process mode, this PC station should
be synchronized by means of the "DCF 77 Client Service" software, which you will need to
install.
The "DCF 77 Client Service" software is available in the "Additional Products" folder on the
toolset DVD.
Requirement
● The "DCF77 Client Service" software must be installed.
You will find additional information on this topic in Section "Configuring the DCF 77 Client
Service".
● The settings are made on the relevant PC station.
Procedure
1. Select Start > Settings > Control Panel from the Windows Start menu.
The "Control Panel" dialog box opens.
2. Double-click the "DCF 77" object.
The "DCF 77 Service" dialog box opens.