Manualshelf

Technical data

ManualsBrandsSiemens ManualsClockSICLOCK TC 400
919293949596979899100
Configuring time synchronization
5.6 Configuring time synchronization for a PC station without OS
Time synchronization (V7.1)
Function Manual, 03/2009, A5E01216578-01
95
5.6.3 How to set time synchronization on a BATCH/operator station
Procedure
If SIMATIC BATCH is installed on the operator station, it will be synchronized via the WinCC
time synchronization. The procedure for this is described in the section "
Configuring time
synchronization of the OS (Page
71)".
5.6.4 How to set time synchronization on a route control/operator station
Procedure
If SIMATIC Route Control is installed on the operator station, it will be synchronized via the
WinCC time synchronization. The procedure for this is described in the section "
Configuring
time synchronization of the OS (Page
71)".