Technical data

Configuring time synchronization
5.7 Time synchronization via conventional point-to-point connections
Time synchronization (V7.1)
Function Manual, 03/2009, A5E01216578-01
97
Setting the DCF 77 reception service for commissioning
To commission the DCF 77 reception service, proceed as follows:
1. Select Start > Settings > Control Panel from the Windows Start menu on your PC station.
The "Control Panel" dialog box opens.
2. Double-click the "DCF 77" object.
The "DCF 77 Reception Service" dialog box opens.
3. Select the COM interface to which the external time receiver is connected.
Default: COM2
4. Set the signal form prescribed by the time receiver manufacturer.
Example: DCF77 demodulated
5. Select the following check boxes in the "Eventlog" area:
– Time
– All valid telegrams
– Quality changes
6. Click "OK".