Data Sheet for Product

ManualsBrandsSiemens ManualsFire - Modular & Networkable Control SystemsMultifunctional Danger Alarm System D100 Stage IIII

A6V10356826_en--_e Building Technologies

2019

Control Products and Systems

Sinteso™/ Cerberus™ PRO

Manual call point

FDM233, FDM234

Manual call point for modernizing addressed systems

● For the modernization of SIGMACON- and SIGMALOOP manual call points for

industrial applications

● Manual call points for addressed Sinteso FS20 and Cerberus PRO FS720 fire

detection systems

● Manual call points FDM233 with indirect activation and FDM234 with direct

activation

● Two-wire installation for all cable types

● Communication via FDnet/C-NET (addressed individually)

Summary of content (6 pages)

PAGE 1
Sinteso™/ Cerberus™ PRO Manual call point FDM233, FDM234 Manual call point for modernizing addressed systems ● ● ● ● ● A6V10356826_en--_e 2019-01-11 For the modernization of SIGMACON- and SIGMALOOP manual call points for industrial applications Manual call points for addressed Sinteso FS20 and Cerberus PRO FS720 fire detection systems Manual call points FDM233 with indirect activation and FDM234 with direct activation Two-wire installation for all cable types Communication via FDnet/C-NET (addressed in
PAGE 2
Properties Features ● For the immediate manual activation of a fire alarm ● Protected electronics ● Built-in alarm indicator (LED) ● Integrated line separator ● Two-color LED for alarm and test Eco-friendly ● Environmentally friendly processing ● Reusable materials ● Electronic parts and synthetic materials can be easily separated Use ● ● ● For indoor and outdoor applications Also for humid, wet, and dusty areas For surface-mounted and recess-mounted feed lines in easily accessible locations Functions Man
PAGE 3
Type Overview FDM233 Type Designation Order number Weight [kg] FDM233 Complete Red housing, glass, key, switching unit, red S54311-F9-A1 0.301 FDMH294-R Red housing, with glass and key S54311-B3-A1 0.100 FDME233 Switching unit for FDM233 S54311-B5-A1 0.106 Type Designation Order number Weight [kg] FDMH294-R Red housing, with glass and key S54311-B3-A1 0.100 FDME234 Switching unit for FDM234 S54311-B4-A1 0.067 Glass insert S24217-G41-A1 0.014 Key S24217-G34-A1 0.
PAGE 4
Notes Mounting ● Installation with recess-mounted feed lines – Break open the openings in the back box ● Installation with surface-mounted feed lines – Use the openings for cable glands at the top and bottom The switching unit can be used immediately after the feed line has been connected; this enables lines to be tested quickly with the line tester FDUL221.
PAGE 5
Dimensional drawings FDM233 / FDM234 38 14 135 143 135 Siemens Schweiz AG, Theilerstrasse 1a CH-6300 Zug Technical data: see doc. A6V10374017 FDM233 - Manual callpoint incl. short-circuit isolator for use in fire detection and fire alarm systems installed in buildings.
PAGE 6
Issued by Siemens Switzerland Ltd Building Technologies Division International Headquarters Theilerstrasse 1a CH-6300 Zug Tel. +41 58 724 2424 www.siemens.com/buildingtechnologies 6 Building Technologies Fire Safety Document ID A6V10356826_en--_e Edition 2019-01-11 © Siemens Switzerland Ltd, 2014 Technical specifications and availability subject to change without notice.