Box PC Owner Manual

Configuring the SIMATIC Box PC 620

5-10

SIMATIC Box PC 620 Manual

A5E00131465-01

”Boot Options” Submenu

The following submenu appears when you select the option “Boot Options” in the

main menu:

PhoenixBIOS Setup Utility

Item Specific Help

QuickBoot Mode:

ESC Exit

Select Item

Select Menu

+ / –

Select

Change Values

Sub-Menu

F10

Setup Defaults

Save and Exit

SETUP prompt: [Enabled]

POST Errors: [Enabled]

Floppy check:

Allows the system to

skip certain tests

while booting. This

will decrease the

time needed to boot

the system.

Enter

Help

Main

Boot Options

[Enabled]

Summary screen:

[Disabled]

[Enabled]

Figure 5-5 ”Boot Options” Submenu

Quick Boot

Mode

Some hardware tests are skipped to speed up the boot procedure.

SETUP prompt The message PRESS <F2> to enter Setup appears at the bottom of the

screen during the system run-up phase.

POST Errors The boot process is stopped if an error is detected; you must press F1 to

acknowledge. Enter “Disabled”to avoid the necessity of acknowledging

errors, for example if no keyboard is connected.