Instruction manual

About this document
11
TNT 35/7-24V
1 About this document
1.1 Other applicable documents
The information on the Safety Sensor is distributed over several documents to
make working with the documents easier. You will find the documents and
programs for the Safety Sensor in the following table:
* identifies the product that the Safety Sensor is installed in.
** You download the current version of the software and all documents as PDF
on the Internet at: http://www.siemens.com/automation
Purpose and target group of the
document
Document/software
title
Source
Basic information for all users of the
machine*; on paper so that the
information is always at hand
Application information Art. no. 607160**
Included with the product
delivery as print and on
CD-ROM
Software for users of the machine*
for Safety Sensor diagnostics if a
fault occurs and for machine design
engineers* for configuring the Safety
Sensor
LS4soft Included with the product
delivery on CD-ROM**
Notes for the machine design
engineer*
Instruction Manual
(this document)
Art. no. 607164**
Included with the product
delivery on CD-ROM
Notes for the machine design
engineer* for configuring the Safety
Sensor (Software LS4soft
instructions)
Operator's Manual Art. no. 607163**
Included with the product
delivery on CD-ROM
Additional information on
SIMATIC FS600 AS-i Laserscanner
3SF7834
Additional information for
Instruction Manual
Art. no. 607061**
Included with the product
delivery on CD-ROM
Additional information on
SIMATIC FS600 PROFIBUS
Laserscanner 3SF7834
Additional information for
Instruction Manual
Art. no. 607062**
Included with the product
delivery on CD-ROM