Instruction manual

Safety
15
TNT 35/7-24V
2.4 Laser
The Safety Sensor corresponds with laser class 1. Additional activities for
shielding the laser beams are not required (safe for eyes).
ª Observe the applicable legal and local regulations for operating laser
equipment.
2.5 Handling the Safety Sensor
ª Observe the permissible environmental conditions for storage and operation.
Front screen and scatter screens
The Safety Sensor's front screen and scatter screens must be clean, free of
damage and properly installed.
ª Avoid touching the front screen and scatter screens.
ª Clean dirty screens immediately (according to these instructions).
ª Have damaged screens replaced immediately (according to these
instructions).
Screwed-on cables
Improper handling can damage the Safety Sensor and result in safety-relevant
signals not being sent. The Safety Sensor's IP type of protection is only
guaranteed with screwed-on plug cover caps.
ª Only operate, transport and store the Safety Sensor with screwed-on control
cable (X1) and PC cable (X2) or dummy plug (X2).
2.6 Usage limits
Only on closed rooms
The Safety Sensor is not suitable for use outdoors or under conditions with
significant temperature fluctuations. Humidity, condensation and other
weather influences can impair the safety function.
ª Only use the Safety Sensor in closed rooms.
ª Observe all technical data and ambient conditions.
Laser Klasse 1
Laser Class 1
Laser de Classe 1