Operating instructions

Guidelines for Installing Networked Automation Systems in Buildings
7-37
SIMATIC NET Twisted-Pair and Fiber-Optic Networks
C79000-G8976-C125-02
Connecting the Prepared FC Cable to the IE FC Outlet RJ-45
Remove the protective foil from
the wires and the support ele-
ment from between the wires.
Spread out the wires according to
the color code shown on the con-
tact cover of the FC Outlet RJ-45.
Open the cover of FC Outlet
RJ-45.
Open both contact covers. Insert the wires of the IE FC ca-
ble fully into the contact cover ac-
cording to the color code.
Press down the two contact co-
vers to contact the wires.
Close and screw down the outer
cover of the FC Outlet RJ-45.
Connect the DTE or network
component using a suitable
RJ-45 patch cable.