Product specifications

Upgrading Existing Series 500 Installations
C-5
SIMATIC 545/555/575 System Manual
Series 500 Base is:
• PPX:500–5228
(16 I/O Slots) or
• PPX:500–5864
(8 I/O Slots)
Controlling Device is:
• 530 (and IOCC if present)
• 520 or
• PPX:500–2103 DBC
Series 500 Base is:
• PPX:500–5848
(14 I/O Slots)
• PPX:500–5884
(12 I/O Slots) or
• PPX:500–5892
(6 I/O Slots)
Controlling Device is:
• 530C/530T (and IOCC if present)
• 520C or
• PPX:500–2109 DBC
Remove controlling device: CPU (and
IOCC, if present) or DBC.
1
Install PPX:500–5840 Adapter Base.
2
Upgrade Path A
1
Remove controlling device: CPU (and
IOCC, if present) or DBC.
2
Set base address(es).
3
Connect twin axial cable to RBC port.
Upgrade Path B
3
Install PPX:500–2151–A or
PPX:500–2153 Power Supply in slot A.
Finish upgrade with these steps:
P/S
555,
Series 505 I/O
4, 8, or 16 slots
[545/555]
or
VMEbus [575]
Local I/O
2
If power supply is in slot B, move it to
slot A. This makes I/O slot #1 available
for an I/O module.
1
Install PPX:500–5114–A RBC.
4
Configure I/O.
545,
or
575*
*545–1104 or –1106 CPU
555–1103, –1104, –1105, or –1106 CPU, or
575–2104, –2105, or –2106 CPU with 575–2126 annex card (Series 505 remote I/O link).
Figure C-1 Upgrading a 520/520C/530/530C/530T System