User Manual Host Adapter SIMATIC TIWAY 1

HOST COMMAND SET REFERENCE
UNILINK HOST ADAPTER5–35
USER MANUAL
Example:
Byte 1, Command Code – ENABLE/
16
Byte 2, Source Identification Number
0F
Bytes 3–4, Enable Buf fer #03
03
Bytes 5–6, Disable Buf fer #C3
01 C3 00 3E 01
Bytes 7 & 8, Enable Buf fer #3E
DISABLE MACRO EXECUTION
Example 5-1 ENABLE/DISABLE MACRO EXECUTION Command
Byte 1, Command Code – ENABLE/
16
Byte 2, Source Identification Number
0F
Bytes 3–4, Buf fer #03 enabled
03
Bytes 5–6, Buf fer #C3 disabled
00 C3 00 3E 07
Bytes 7 & 8, Buf fer #3E not
DISABLE MACRO EXECUTION
enabled because secondary
is of fline.
Example 5-2 ENABLE/DISABLE MACRO EXECUTION Response