Computer Drive Installation Instructions

09.95 6 NC Machine Data (NC MD), NC Setting Data (NC SD)
6.6.6 Channel-specific MD bits 2
6.6.6 Channel-specific MD bits 2
7 6 5 4 3 2 1 0
Bit No.
NC MD
9000
to
9005
Axis 8 Axis 7 Axis 6 Axis 5 Axis 4 Axis 3 Axis 2 Axis 1
9020
to
9025
Axis 16 Axis 15 Axis 14 Axis 13 Axis 12 Axis 11 Axis 10 Axis 9
9040
to
9045
Axis 24 Axis 23 Axis 22 Axis 21 Axis 20 Axis 19 Axis 18 Axis 17
9060
to
9065
Axis 30 Axis 29 Axis 28 Axis 27 Axis 26 Axis 25
Channel-specific axis allocation for multi-channel display
(channels 1 to 6)
Channel-specific axis allocation for multi-channel display
(channels 1 to 6)
Channel-specific axis allocation for multi-channel display
(channels 1 to 6)
Channel-specific axis allocation for multi-channel display
(channels 1 to 6)
Default value: 0
Channel 5 and 6 as from SW 4
Note:
Valid if option "Multi-channel display" is set.
As from SW 5 also valid with single-channel display if NC MD 5053, bit 0=1
Note:
See also description of NC MD 5053, bit 0, channel-specific axis and spindle display.
Channel-specific spindle assignment with multiple-channel display (up to SW 4)
Channel-specific spindle assignment with single and multiple channel display (as from
SW 5)
7 6 5 4 3 2 1 0
Bit No.
NC MD
9100
to
9105
Spindle 6 Spindle 5 Spindle 4 Spindle 3 Spindle 2 Spindle 1
Channel-specific spindle allocation for multi-channel display
(channels 1 to 6)
Default value: 0
Channel 5 and 6 as from SW 4
Note:
Valid if option "Multi-channel display" is set.
As from SW 5 also valid with single-channel display if NC MD 5053, bit 0=1
Note:
See also description of NC MD 5053, bit 0, channel-specific axis and spindle display.
©
Siemens AG 1992 All Rights Reserved 6FC5197- AA50 6–155
SINUMERIK 840C (IA)