Technical information

Technical Description
SIMpad SL4
Version V2.0
Siemens AG 42/74
ICM CP 20.08.01, David Brunner
• COM2 (not used)
• COM3 (not used)
• Generic IrDA modem
• IR on SP2
Direct connection • COM2
• Infrared Port
• Serial cable on COM1
The following parameters can be configured:
Parameter Default value
Device properties
Port settings Manual dial (user supplies dial strings) (not selected)
Use terminal window before dialing (not selected)
Use terminal window after dialing (not selected)
Baud rate 115200
Data bits 8
Parity none
Stop bits 1
Flow control none
Call Options Cancel the call if not connected within
... seconds
selected, 120
Wait for dial tone before dialing selected
Wait for credit card tone ... seconds 0
Extra settings (special modem
commands may be inserted into the
dial string)
(none)
TCP/IP settings
General Use server-assigned IP address selected
IP address: (none)
Use Slip (not selected)
Use software compression selected
Use IP header compression selected
Name servers Use server-assigned addresses selected
Primary DNS (none)
Secondary DNS (none)
Primary WINS (none)
Secondary WINS (none)
Dial-up connection
Country code (none)
Area code (none)
Telephone number (none)
Force long distance (not selected)
Force local (not selected)
5.4.6.2 HomeRF Configuration
The following parameters of HomeRF terminal can be configured:
Parameter Default value
Internet access
PPPoE (direct connection): (not selected)
User-ID (none)
Password (none)