Technical information

Technical Description
SIMpad SL4
Version V2.0
Siemens AG 43/74
ICM CP 20.08.01, David Brunner
DHCP (e.g. with a WLAN): selected
Host name (none)
Network password (none)
Connection set-up
Enable automatic connection selected
Automatic connection when receiving
e-mails
(not selected)
Disable automatic connection (not selected)
Disconnection
When inactive automatically
disconnect after ... minutes
selected, 0
Do not disconnect automatically (not selected)
Indicated parameters (only when PPPoE active):
• IP address
• Subnet mask
• Standard gateway
• First DNS server
• Second DNS server
• Connection time
5.4.6.3 I-Gate Configuration
This program allows the configuration of the I-Gate NIC with the possibility to rescan
the WLAN (in order to find an access point) and to write and clear of the WEP key.
The access point parameter cannot be configured here. For I-Gate access points
(minimum firmware version 2.1.5) it is possible to establish a HTTP connection with
the access point. The configuration menu is displayed in the Internet Explorer (see
5.3.3.2).
The following parameters can be configured with the I-Gate NIC configuration
program:
Parameter Possible values/Range Default value
Configuration
Mode
• AdHoc, 802.11
• AdHoc
• Infrastructure
Infrastructure
SSID
(any) (none)
TxRate
• Fully automatic
• 1 Mbps
• 2 Mbps
• Auto 1 or 2 Mbps
• 5.5 Mbps
• 11 Mbps
Fully automatic
PS Mode
• Disabled
• Enabled
Disabled
WEP
• Disabled
• 64 bit
• 128 bit
Disabled
Encryption
Passphrase
(any) (none)
• 64 bit: 4 keys with 10
characters
• 128 bit: 1 key with 26
characters
(none)