Technical information

Technical Description
SIMpad SL4
Version V2.0
Siemens AG 44/74
ICM CP 20.08.01, David Brunner
The following link information is indicated:
• State (indication of the MAC address of the access point PC-Card if in
infrastructure mode, in ad hoc mode no MAC address is indicated)
• Current Channel
• Current TxRate [Mbps]
• Link quality [%]
• Signal strength [%]
5.4.6.4 PC Direct Connection
Manual activation of a PC direct connection as defined with the program Remote
Network (see 5.4.6.1) and activated as default PC direct connection in the
Communication setting program (see 5.4.13.2).
5.4.6.5 Terminal
Terminal emulation program supporting TTY and VT-100 terminal emulation. As for
the program Remote Network (see 5.4.6.1) various connection set-up can be created,
edited or deleted. The communications can be defined for all available modem
interfaces:
• Hayes-compatible on COM1 (RS-232)
• COM2 (not used)
• COM3 (not used)
• Generic IrDA modem
• IR on SP2
A connection set-up appears as an icon or as an entry in a list. It contains all pre-
configured parameters (interface, calling number, server name etc.). The required
connection is set up by a double click on the appropriate entry.
The following parameters can be configured:
Parameter Default value
Data transfer
Session name (none)
Modem connection (none)
Telephone number (none)
Country code (none)
Force long distance (not selected)
Force local (not selected)
Dial-up parameters
Dial-up from “office” or “home” office
Actual country code (none)
Actual local code (none)
Dial-up with tone of pulses tone
Knocking block by dialing: ... (not selected),
(none)
Dial-up pattern
Local calls number
Long distance calls Local code,
number
Calls abroad Country code, local
code, number
Emulation
Emulation type: DEC VT-100 or TTY
(generic)
DEC VT-100
Code: Automatic search, US-ASCII,
JIS, SJIS or Unicode
Local echo (not selected)