Technical information

Technical Description
SIMpad SL4
Version V2.0
Siemens AG 54/74
ICM CP 20.08.01, David Brunner
Primary DNS (none)
Secondary DNS (none)
Primary WINS (none)
Secondary WINS (none)
5.4.13.12 Software
This control panel allows the de-installation of certain programs.
5.4.13.13 Touch calibration
This control panel permits the re-calibration of the touch panel. The user must use the
pen to select 5 positions which are indicated by a crosshair. It is the same program as
the one described in see 5.2.4.1. After the calibration has been carried out, the
matrices for the screen and the touch panel will be in agreement again.
Additionally, the user can calibrate and test the “double-click” speed.
5.4.13.14 Power
The quality (good, low, minimum) and the percentage charge level of the battery is
indicated. Furthermore, it is possible to specify the automatic switch-off time. This is a
defined time, for which the SIMpad SL4 must remain in its idle mode (see 1.3) before it
is automatically switched off. Default switch-off time is 3 minutes idle mode.
The automatic switch-off time can be activated when the SIMpad SL4 is powered from
the power pack. A separate switch-off time is set for this case (default: 5 minutes).
5.4.13.15 System
This control panel shows the hardware and software versions installed, as well as the
size and split of the RAM memory. The user can also set the split between Object
Store and Program Memory (see 2.4.1), in virtually continuous steps. It should be
noted that the two areas are always used. Hence, neither of the two areas should be
excessively reduced to the benefit of the other.
• Setting of the memory split: program memory and data memory (see 2.4)
• Indication of the reserved memory sizes
• Indication of the used memory (both parts)
This control panel is identical with the memory control panel described in 5.4.13.5.
Indication of the following hardware and software version:
Hardware/Software component version
Device
Processor StrongARM SA-1110
Memory 62792 KB RAM
Slot 1 (none)
Slot 2 (none)
System
Microsoft® Windows® for
Handheld PC 2000