Technical information

Technical Description
SIMpad SL4
Version V2.0
Siemens AG 58/74
ICM CP 20.08.01, David Brunner
5.4.14.3 Modem
Modems are preferably connected via the serial interface (see 4.1). The following
modems have been tested and are supported:
• Zyxel: Omni 56K (analog)
• Zyxel: Omni.net D (ISDN)
• 3Com U.S. Robotics: 56k Faxmodem (analog)
• 3Com U.S. Robotics: Courier I-Modem (ISDN)
The modems have can be connected with the serial cable (see 6.1.3) and the adapter
plug (see 6.2.2) as shown in Fig. 12 .
Lumberg D-Sub
(female)
D-Sub
(male)
Adapter plug
Fig. 12 Cable arrangement for a serial wired connection SIMpad SL4 – modem
5.4.14.4 PC
A connection to a PC is possible in the following ways:
• Via serial link, using the serial cable (see s 4.1 and 6.1.3)
• via IrDA (see 4.3)
• via HomeRF PC-Card (see 3.2)
• via WLAN PC-Card (see 3.1)
• via other communication PC-Card (see s 3 and Fehler! Verweisquelle konnte
nicht gefunden werden.)
The software supporting the data exchange over the serial links is ActiveSync (see
5.4.5). Data exchange over a wireless network requires additional software enabling
data handling. The Windows Explorer (see Fehler! Verweisquelle konnte nicht
gefunden werden.) under Windows CE 3.0 does not support file handling in a
network!
5.4.14.5 Headset
The following two Siemens headsets can be connected to the SIMpad SL4 on the
Lumberg plug (see 4.1):
• L36880-N3015-A119
• L36880-N4001-A123
The actual software supports only audio output to the headset. Audio input from the
headset is not supported.