Technical information

Technical Description
SIMpad SL4
Version V2.0
Siemens AG 7/74
ICM CP 20.08.01, David Brunner
1 Use and operation
1.1 Housing and construction
The housing consists of two black plastic shells which are screwed together. The
underside rests on rubber feet. For charging the battery in the charging tray, two
contacts are fitted on the underside of the housing.
The front is painted dark silver. On the right-hand side is an unpainted black vertical
strip. For simple, basic operations there are three buttons and a concave, round
wobble plate with four contact points (top, bottom, left and right, non-rotating) at top
right. Two LEDs inform the user about the operating state and charge state.
Dimensions 263 x 181 x 30 mm (WxHxD)
Weight 1 kg
Front colour dark silver (display silver)
Colour of back housing shell and side strip black
Upper and lower shell plastic, screwed
Pin Black plastic pin with plastic
tip
(can be pushed into shell,
latches)
On/off key
Wobble plate
Softkeyboard
Battery charging LED
Running LED
Loudspeaker
Right mouse button
Touch
display
Microphone
Stylus Pen
2
63
2
5
4
1
8
1
Fig. 1 Device design and controls