Specifications

SINAMICS G150 NEMA
Type C enclosed chassis
3
Siemens D11.7 (Part 1) – 2013
M07
Base (plinth) 8” (200 mm) high
The 8” enclosure base provides more space for bending
and routing cables. The base is delivered already mounted
to the enclosure. The height of the operator panel
changes accordingly.
The base color is the same as the enclosure, RAL 7035 (light
grey). If the enclosure is ordered in a special color (option
Y09), the 8” base is also painted the same color.
M23
Enclosure NEMA 1 filtered
Louvers and foam air filters are added to air inlet and outlet
openings (IP23). A NEMA 1 filtered enclosure is required to
meet the requirements for listing the enclosed drive
per UL508A.
M43
Enclosure IP43
Similar to NEMA 1 filtered (M23), but additionally a 1mm
wire mesh is provided behind the air filters.
M54
Enclosure NEMA 12 (ventilated)
Louvers and fine paper air filters are added to air inlet and
outlet openings (IP54), to prevent even fine dust particles
from entering the enclosure in very dusty environments.
These fine dust filters are a patented design for high volume
airflow with small derating. The drive current must be
derated to 95% with a NEMA 12 filtered enclosure.
M90
Lifting beam/eye bolts
Note: Option M90 is strongly recommended, to enable
lifting the drives off their pallet safely.
For single cabinets up to a width of 24” (600 mm), eye bolts
are provided. For larger enclosures transportation beams
are provided.
Once the drives are in position, the lifting hardware needs to
be removed to mount the tophats. For multiple drives with
identical enclosure sizes, option M90 can be ordered once
and the hardware re-used for other units.
U90
UL listing per UL508A
The drive is provided with the UL listing mark per UL508A
(UL file number E83449).
UL listing mark
The basis for UL listing is the maximum continuous output
current rating of the drive. For a specific duty cycle rating
(light overload/VT or high overload/CT) the respective base
load current may not in all instances be in line with the
current rating per NEC table 430-150.
Note UL listing requires air filters (options M23 or M43
or M54).
U91
cUL listing for Canada per UL508A
The drive is provided with the cUL listing mark for Canada
per UL508A (UL file number E83449).
Note cUL listing requires air filters (options M23 or M43 or
M54), and English/French nameplate (T58).
Y09
Special enclosure paint color (specify color)
The standard color of the drive enclosures is RAL 7035 (light
grey). The special color must be specified in plain text when
ordering.
In general, colors available as powder coating can be
ordered. Please consult factory to confirm. The enclosure,
tophats and, if specified, 8” high plinths (option M07) will
be supplied in the specified special color.
Note:
1. The molded plastic parts (e.g. louvers) are colored
RAL 7035 and cannot be painted.
2. 4” plinths are always colored RAL 7022 (umber grey).
3. Cabinet frames and interiors are always colored RAL 7035.
SINAMICS G150 type C with eye bolts
Description of options
3/10