Specifications

SINAMICS G150 NEMA
Engineering information
4
Siemens D11.7 (Part 1) – 2013
Technical data
4/2
Electrical data
Supply voltages and output ranges 380 V to 480 V 3 ph AC, ±10% (-15% < 1 min) 150 to 800 HP
500 V to 600 V 3 ph AC, ±10% (-15% < 1 min) 150 to 800 HP
Supply systems Grounded (TN/TT) supplies or ungrounded (IT) supplies
Line frequency 47 Hz to 63 Hz
Output frequency 0 Hz to 300 Hz
Power factor fundamental / total >0.96 / 0.75 ... 0.93
Converter efficiency > 98%
Control method Vector control (sensorless & closed loop) or V/Hz control
Fixed speeds 15 fixed speeds plus 1 minimum speed, programmable (in the default setting 3 fixed setpoints plus 1
minimum speed can be selected via digital inputs or bus communications)
Skipped frequency ranges 4, programmable
Setpoint resolution 0.001 rpm digital / 12 bit analog
Braking operation optional via braking unit
Mechanical data
Type of enclosure NEMA1 (optionally NEMA 1 filtered or NEMA 12 ventilated)
Enclosure details Rittal TS8, doors with double bit lock and 3-point latch, three section base plates for cable entry
Enclosure color RAL 7035 light grey, indoor installation
Type of cooling Forced air ventilation
Noise level LpA (1 m) < 75 dB at 60 Hz line frequency
Environmental protection Nickel plated busbars, varnish coated electronic boards
Compliance with standards
Standards NEMA ICS 7, NEMA ICS 7.1, NEMA 250, NFPA79, UL508C for power module, ISO 13849-1, IEC 60146-1-1,
IEC 60204-1, IEC 60529, IEC 60508-1, IEC 61800-2, IEC 61800-3, IEC61800-5-1, IEC 61800-5-2
UL listing Optional listing per UL508A
CE marking In accordance with EMC directive No. 2004/108/EC and low-voltage directive No. 2006/95/EC
EMC conformance EMC conformance is compliant with the EMC product standard for variable-speed drives IEC 61800-3 for the
“Second environment”, category C3 (industrial supply systems).
The equipment is not designed for connection to the “First environment” (public/ residential supply systems)
and may cause electromagnetic interference on a public system.
Ambient conditions Operation Storage Transport
Ambient temperature 32°F to 104°F (0 °C to +40 °C) -13°F (-25 °C) to 131°F -13°F (-25 °C) to 158°F (+70 °C)
Up to +122°F (+50°C) with derating (+55 ºC) Above -40°F (-40 °C) for 24 hours
Relative humidity (non-condensing) 5% to 95% 5% to 95% 5% to 95% at 40 ºC
Class 3K3 to IEC 60721-3-3 Class 1K4 to IEC 60721-3-1 Class 2K3 to IEC 60721-3-2
Environmental class/harmful Class 3C2 to IEC 60721-3-3 Class 1C2 to IEC 60721-3-1 Class 2C2 to IEC 60721-3-2
chemical substances
Organic/biological influences Class 3B1 to IEC 60721-3-3 Class 1B1 to IEC 60721-3-1 Class 2B1 to IEC 60721-3-2
Installation altitude Up to 6,600 ft (2000 m) above sea level without reduction in performance, > 6,600 ft see derating data
Mechanical stability Operation Storage Transport
Vibratory load
- Deflection 0.075 mm at 10 Hz to 58 Hz 1.5 mm at 5 Hz to 9 Hz 3.1 mm at 5 Hz to 9 Hz
- Acceleration 10 m/s
2
at > 58 Hz to 200 Hz 5 m/s
2
at > 9 Hz to 200 Hz 10 m/s
2
at > 9 Hz to 200 Hz
– Class 1M2 to IEC 60721-3-1 Class 2M2 to IEC 60721-3-2
Shock load
- Acceleration 100 m/s
2
at 11 ms 40 m/s
2
at 22 ms 100 m/s
2
at 11 ms
Class 3M4 to IEC 60721-3-3 Class 1M2 to IEC 60721-3-1 Class 2M2 to IEC 60721-3-2
Deviations from the defined classes are identified by underlining.