Data Sheet for Product

4
Siemens Schweiz AG
A6V11162647_en--_b
Building Products
2021-03-10
WARNING
System actuation hazard
Do not electrically connect the actuator. It will be electrically connected during
commissioning.
Refer to the installation instructions for details.
NOTICE
Actuators are sensitive devices.
Handle actuators with care during storage, mounting, commissioning, and maintenance.
Maintenance
Storage
● Store in its original packaging, protected from shocks.
● Store in a clean and dry location, protected from bad weather.
Inspection
The frequency of the product inspection is subject to applicable local regulations. For more
information, refer to the maintenance documentation.
● Check the good condition of the product.
● Check that each fitting has been properly tightened using the appropriate wrench. Re-
tighten if necessary.
Refer to the mounting and maintenance instructions to obtain the detailed procedure.
After an actuation
● Unscrew the actuator from the cylinder valve.
● Replace the cylinder.
● Move the cap of the EL valve actuation port from the full to the empty cylinder.
● Fit the actuator to the EL valve actuation port, on the full cylinder.
● Connect the cable.
Only use actuators in good condition.