Operating instructions

Installing option modules
5.1 General information on installing option modules
SIPART PS2 with and without HART communications
58 Operating Instructions, 09/2008, A5E00074631-08
See also
Iy module (Page 59)
Alarm unit (Page 60)
5.1.4 Installing the module cover
Installing the module cover
Note
Untimely wear
The module cover is fastened using self-tapping screws. You can prevent the module cover
from wearing untimely by adhering to the installation instructions.
Proceed as follows to install the module cover:
1. Turn the screws anticlockwise until they noticeably engage in the thread pitch.
2. Carefully tighten both the screws clockwise.