Operating instructions

Installing option modules
5.3 Alarm unit
SIPART PS2 with and without HART communications
Operating Instructions, 09/2008, A5E00074631-08
61
Installation
Proceed as follows to install the alarm unit:
1. Slide the alarm unit below the motherboard in the module rack. Ensure that you slide it up
to the end stop.
2. Connect the module to the motherboard. For this purpose, use the 8-pole flat ribbon
cable provided.
See also
Safety notes for installing the option modules (Page 53)
Installing optional modules in the standa
rd and intrinsically safe version (Page 54)
Installing the optional modules in the "flameproof enclosure" versio
n (Page 56)