Operating instructions

Operating

7.2 Operating modes

SIPART PS2 with and without HART communications

100 Operating Instructions, 09/2008, A5E00074631-08

7.2.3 Overview of configuration

The following figure shows the operation of the configuration and initialization modes.

VLPXOWDQHRXV VLPXOWDQHRXV

XQWLO

Figure 7-4 Overview of configuration

7.2.4 Description of operating modes

P-manual mode

Note

The "P-manual mode" is preset for the positioner in the as-delivered condition.

The digital display of the positioner shows the current potentiometer position in the upper

line. "NOINI" blinks in the second line of the digital display.

You can move the actuator using the

decrement and increment buttons.

Switch to "Configuration" and "Initialization mode" to adapt the actuator as per the positioner.

Alarms or position feedbacks can be triggered after initializing the positioner completely.