Data Sheet for Product

Technical Specification Sheet
Rev. 1, July, 1999
Document No. 149-395P25 Page 1 of 6
S10 Standalone Access Control System
Figure 1. APOGEE Security Technologies’ S10 standalone access control system
shown with magnetic stripe readers with and without LCD.
Description
The S10 Standalone Access Control System is a low
cost, easy-to-install access control and door alarm
monitoring system with one master card reader and
up to seven satellite readers. The system is
designed for ease of installation, offering an
integrated programming facility in the master reader.
A system printer may be used for transaction logging
and report generation. A unique feature of the
system is that it can be integrated into any of the
access control systems if security requirements
expand.
Features
x
Standalone master reader with integral
programmer, LCD display, card reader and
keypad
x
Supports up to 1,000 card holders in the single
stage reader, 8,000 in the two stage version
x
Supports up to seven satellite card readers with
keypads, programmed from the master reader
x
Six separate door modes: lock, unlock, PIN only,
card only, card and PIN, and keypad only
x
Eight system time zones with sixteen holidays
x
Door held open and door forced open monitoring
with local audible annunciation
x
Simple programmer can control up to 8 door
readers and/or eight keypads
x
Keypad only mode allows entry by keypad only,
no cards required

Summary of content (6 pages)