Data Sheet for Product

ManualsBrandsSiemens ManualsACCESS - Core Software - 3SAPSiPass integrated – brochure

Technical Specification Sheet

Rev. 1, July, 1999

Document No. 149-388P25 Page 1 of 6

Remote Input Modules (RIM),

Remote Relay Modules (RRM),

Remote Enclosures (REN)

Figure 1. APOGEE Security Technologies’

RIM (left) and RRM (right).

Description

High-density alarm input capability is available with

the Remote Input Module (RIM) and high-density

relay output capability is available with the Remote

Relay Module (RRM) from APOGEE Security

Technologies. When multiple RIMs and/or RRMs are

required, a large Remote-Enclosure (REN) is available

for mounting the modules in flexible, customer-

definable configurations.

Features

Intelligent remote modules provide flexible and

cost-effective status monitoring and control

capabilities

Use of remote modules on an ACU does not

diminish the reader capacity

Available with or without enclosure

Remote Input Module (RIM)

Provides sixteen UL grade AA supervised inputs

and three unsupervised inputs

16 tri-color and 8 standard LEDs for status and

diagnostics indication

2 form C relays are provided (SPDT 30 V dc at

2 A)

Remote Relay Module (RRM)

Provides sixteen form C relay outputs (8 DPDT

and 8 SPDT 30 V dc at 2A)

16 LEDs indicate the state of each relay

6 LEDs for status and diagnostic indication

Remote Enclosure (REN)

Configurable enclosure to house multiple RIMs

and RRMs in any combination

Summary of content (6 pages)

PAGE 1
Technical Specification Sheet Rev. 1, July, 1999 Remote Input Modules (RIM), Remote Relay Modules (RRM), Remote Enclosures (REN) Features x Intelligent remote modules provide flexible and cost-effective status monitoring and control capabilities x Use of remote modules on an ACU does not diminish the reader capacity x Available with or without enclosure Remote Input Module (RIM) Figure 1. APOGEE Security Technologies’ RIM (left) and RRM (right).
PAGE 2
1 SECURE SEC0089R1 2 ALARM ALARM 3 OPEN 4 SHORT Figure 2. Four-State Supervision – All alarm input points of the ACU, RRE and RIM are fully supervised using dual end-of-line resistors. Four-state supervision indicates all wiring conditions.
PAGE 3
Specifications Remote Modules Remote Module RIM-0 Remote Module RIM-1 Remote Module RRM-0 Remote Module RRM-1 Remote Module REN Remote Module REND x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x Enclosure: none; back plate only. Includes 1 RIM-0 Max. model capacity: 1 RIM-0 Inputs: 16 Outputs: 2 Power supply: no Enclosure: 12" H x 12" L x 4" D (30.5cm x 30.5cm x 10.2cm) Includes 1 RIM-0 Max.
PAGE 4
Ordering Information Table 1. Remote Input Module (RIM) Description Product Number Remote input module, no enclosure, w/mounting plate RIM-0CP Remote input module, with enclosure RIM-1CP Enclosure lock (one required per RIM that is to have a lock) RRL Table 2. Remote Relay Module (RRM) Description Product Number Remote relay module, no enclosure RRM-0CP Remote relay module, with enclosure RRM-1CP Enclosure lock (one required per RRM that is to have a lock) RRL Table 3.
PAGE 5
(4) Select the appropriate code for one of the RRM Board options listed below. Enter selected code in Box 4. Code Description 0 No dial-up 1 Configured for dial-up EXAMPLE: Once all boxes have been completed, you have a product number for the desired special configuration. As shown in the example below, the number is: REN-2P1. Base Product REN- RIM Boards 2 Power Supply P RRM Boards 1 .
PAGE 6
Notice: Information in this document is based on specifications believed correct at the time of publication. The right is reserved to make changes as design improvements are introduced. Credits: APOGEE is a trademark of Siemens Building Technologies, Inc. Other products and company names herein may be the trademarks of their respective owners. Copyright 1999 by Siemens Building Technologies, Inc. Siemens Building Technologies, Inc. 1000 Deerfield Parkway Buffalo Grove, IL 60089-4513 Printed in the U.S.A.