Data Sheet for Product

ManualsBrandsSiemens ManualsACCESS - Core Software - 3SAPSiPass integrated – brochure

Technical Specification Sheet

Rev. 1, July, 1999

Document No. 149-393P25 Page 1 of 4

RPP2-54/55 Two-stage

Proximity Card Readers

Figure 1. APOGEE Security Technologies’ two-stage proximity card readers,

RPP2-54 (left) and RPP2-55 (right).

Description

The RPP2-54 and RPP2-55 Proximity Card Readers

from APOGEE Security Technologies combine all of

the electronics usually found in two separate

packages into a single, architecturally attractive

enclosure that mounts to a standard single-gang

electrical box. With its inherently weatherproof

design, the reader is easily mounted either indoors or

out.

Using advanced surface-mount technology

manufacturing techniques, these readers offer high

reliability, consistent read range characteristics, and

low power consumption in a single, easy-to-install

package. Standard capabilities include multicolor

LED, local or system control of the LED and/or

beeper, and a beeper "off" switch for silent operation.

The readers offer Wiegand protocol interface

compatibility with all standard access control

systems. To provide an additional level of security,

the RPP2-55 reader is the first to offer an optional,

fully integrated personal identification number

keypad, weatherized for outdoor applications.

Features

Easily mounted on standard single gang box

Can be mounted on metal

Multicolor LED and beeper

Self diagnostics on power up

Indoor/outdoor design, weatherized

Easy interface, Wiegand output

Built in tamper switch

Over 137 billion unique codes

Optional weatherized integrated keypad

Summary of content (4 pages)

PAGE 1
Technical Specification Sheet Rev. 1, July, 1999 RPP2-54/55 Two-stage Proximity Card Readers Figure 1. APOGEE Security Technologies’ two-stage proximity card readers, RPP2-54 (left) and RPP2-55 (right). Description The RPP2-54 and RPP2-55 Proximity Card Readers from APOGEE Security Technologies combine all of the electronics usually found in two separate packages into a single, architecturally attractive enclosure that mounts to a standard single-gang electrical box.
PAGE 2
7.5" (19.1cm) 6.500" (16.5cm) 6.500" (16.5cm) SEC0094R1 0.9" (2.3cm) 7.5" (19.1cm) Figure 2. Dimensions Mounting Mounting holes fit standard U.S.A. single-gang switch boxes (vertically mounted) to simplify installation. When mounted directly to metal, a selectable jumper setting is provided for improved performance. Audiovisual Indication When a proximity card is presented to the reader, the red LED flashes green and the beeper sounds.
PAGE 3
Specifications Typical Maximum* Read Range ProxCard® II card up to 9" (23 cm) ISOProx® II card up to 6" (15 cm) ProxKey™ II keyfob up to 3" (7.6 cm) ProxCard® Plus card up to 3" (7.6 cm) Dimensions 5.0"x5.0"x1.0" (12.7x12.7x2.54 cm) Material Polycarbonate UL 94 Power Supply 10 - 28.5 VDC Reverse voltage protection included. Linear power supplies are recommended.
PAGE 4
Ordering Information Description Product Number Two Stage Proximity 2 Reader Door Frame RPP2-54CP Two Stage Proximity 2 Reader Door Frame with Optional Keypad RPP2-55CP Standard color is charcoal gray. Notice: Information in this document is based on specifications believed correct at the time of publication. The right is reserved to make changes as design improvements are introduced. Credits: APOGEE is a trademark of Siemens Building Technologies, Inc.