Data Sheet for Product

ManualsBrandsSiemens ManualsACCESS - Core Software - 3SAPSiPass integrated – brochure

Technical Specification Sheet

Rev. 1, July, 1999

Document No.149-386P25 Page 1 of 6

ACU2 Networked Intelligent Controller

Figure 1. APOGEE Security Technologies’

ACU2 networked intelligent controller.

Description

The ACU2 Networked Intelligent Controller features

state-of-the-art technology optimizing both the

flexibility and reliability required for today’s access

control and alarm monitoring environment.

Using a 16-bit microprocessor, the ACU2 is available

with up to 4 MB RAM and up to 512 KB ROM, to

provide complete flexibility in card populations of up

to 128,000 together with the widest possible range

of programmable features.

By utilizing external RIM and RRM input and relay

output modules, the ACU2 can monitor and control

large numbers of alarms and relays up to 4,000 ft.

from the ACU2.

Features

Eight card readers total -- Two multi-dropped RS-

485 ports with four readers each

Supports magnetic stripe, Weigand, barium

ferrite, infra red bar code, proximity and smart

card technologies

Includes twelve fully supervised four state alarm

inputs configurable for door contacts, request-to-

exit, intrusion detection or general alarms

Includes twelve relay outputs configurable for

door locks, local annunciation, or auxiliary outputs

Supports remote input modules (RIMs) and

Remote Relay Modules (RRMs) to a maximum of

172 fully configurable supervised four state

inputs and 156 fully configurable form C outputs

Provides local and global alarm masking

capabilities initiated from card readers, keypads

or operators

Full system data base and parameters

downloaded for real time local processing and

control

Local storage of 10,000 cardholder records

(options to 50,000 or 128,000) with minimum

1,000 event transactions

Full UPS battery backup for controller, card

readers, modems and door locks standard

Configurable local alarm-to-relay linking and local

annunciation with conditional relay activation

Will support multiple and card and reader

technologies plus keypad, with variable card

formats, site codes and company codes on a

reader by reader basis

Provides local and timed antipassback facilities,

or global antipassback through the CPU

RS-232C and RS-485 host port communication

compatible with most modems and fiber optics

Summary of content (6 pages)

PAGE 1
Technical Specification Sheet Rev. 1, July, 1999 ACU2 Networked Intelligent Controller Features Figure 1. APOGEE Security Technologies’ ACU2 networked intelligent controller.
PAGE 2
TO HOST COMPUTER TO OTHER ACU'S 6 TWELVE AUXILIARY RELAY OUTPUTS ACU 2 3 MAGNETIC DOOR CONTACT TWELVE SUPERVISED ALARM INPUTS 2 4 1 4 SUPERVISED INPUTS AT THE CARD READER, CONFIGURABLE FOR: DOOR CONTACT EXIT BUTTON/SENSOR OTHER ALARMS MAGNETIC STRIPE OR WIEGAND EXIT REQUEST BUTTON/ SENSOR 4 - OR DOOR LOCK SEC0077R1 ONE RELAY AT THE CARD READER, CONFIGURABLE FOR: DOOR LOCK AUXILIARY OUTPUT Figure 2: Integrated Interface Cable Number Description Belden Cable Number (or approved equivalent) Dis
PAGE 3
TO HOST 1 TO OTHER ACU'S 6 RRE 3 TWELVE AUXILIARY RELAY OUTPUTS MAGNETIC DOOR CONTACT ACU 2 REMOTE READER ELECTRONICS ALARM INPUTS 2 5 TWELVE SUPERVISED ALARM INPUTS 4 DOOR LOCK SEC0078R1 EXIT REQUEST BUTTON/ SENSOR BAR CODE, BARIUM FERRITE, MAGNETIC STRIPE, PROXIMITY OR WIEGAND Figure 3: Remote Interface (same number key as Figure 2) card records (optionally 50,0000 or 128,000) each stored with PIN, time zone and door authorization parameters.
PAGE 4
Specifications Power Fault Detection Internal for the detection and reporting to the host of power fault conditions Access Control Doors Access Alarm Monitoring For 8 doors. Each card reader is user-configurable (card-only, card and keypad, or keypad only). Includes the detection and reporting of: x Door forced open alarm x Door held open alarm x Card reader tamper alarm x Card reader off-line alarm Each ACU card reader includes 4 user-configurable alarm inputs.
PAGE 5
Ordering Information Table 1. Standard ACU2 Networked Intelligent Controllers Description Product Number ACU2 Networked Intelligent Controller, board and PROM only with 10,000 card capacity ACU2-A0A0-CP ACU2 Networked Intelligent Controller with 4 amp power supply, 10,000 card capacity and standard enclosure. UL Listed. ACU2-A1B0-CP ACU2 Networked Intelligent Controller with 8 amp power supply, 10,000 card capacity and standard enclosure. UL Listed. ACU2-A2B0-CP Table 2.
PAGE 6
EXAMPLE: Once all boxes have been completed, you have a product number for the desired enhanced configuration. As shown in the example below, the number is: ACU2-C1B1-CP. Base Product ACU2- Card Capacity Power Supply C 1 Enclosure B Dial-up Option Base Product 1 -CP Table 3. UPS Battery Option for ACU2 Description Product Number Battery 12 VDC, 7 amp-hr Gel-Cell Batteries, no mounting bracket ACU-BAT-1 Table 4. Other ACU2 Options Description Product Number ACU2 DES Encryption Option.