User Manual

12
Fire & Security Products
Siemens Building Technologies
03.2003
2.4 Subsystem “Options’’
2.4.1 CZ-10
Enables Gas and Technological management in the general commands issued by
LMS.
CZ-10 Subsystem
‘’Options’’
Acknowledge/Reset command
0 Both enabled
1 Gas disabled
2 Technological disabled
3 Both disabled
Tab. 35
2.4.2 CC-11
Enables support of specific CC-11 versions.
CC-11 Subsystem ‘’Options’’ Acknowledge/Reset command
0 Same as 4
1 Reserved
2 Reserved
3 CC-11 EP3
4 CC-11 EP4 or later
Tab. 36
2.4.3 CDSS (Cerberus Dati Standard subsystem)
The CDSS subsystems may or may not require ack/reset commands addressed to
each specific object.
LMS configuration includes a specific option for this function. In the subsystem setting,
the generic field named ‘’option’’, for the CDSS subsystem can assume the following
values:
CDSS Subsystem ‘’Options’’ Acknowledge/Reset command
0 General command (parameter 1=0)
1 Reserved
2 Reserved
3 Addressed command
(parameter 1=point number)
Tab. 37