User Manual

21
Fire & Security Products
Siemens Building Technologies
03.2003
Vitality Telegram Manage-
ment
It is used to manage the vitality message issued by Cerberus control units. If the flag
is set to Y, the LMS will evaluate these messages, otherwise (flag set to N) it will dis-
card them. This flag is used by LMS in conjunction with the vitality timer set for each
subsystem. If the vitality timer is set to 0 during subsystem configuration, LMS will not
evaluate the vitality message for that subsystem, even if the software option is set to
Y. Default value is N.
Graphic Station If this flag is set to 1, the Graphic Station is enabled. You must have configured the
fifth page associated to the subsystem and/or point. This page is automatically dis-
played on the Graphic Station screen, if it is properly connected to LMS Operating
Station through a Windows compatible network.
Guard Tour management The flag can have the value Y (for Yes, Guard Tour in enabled) or N (Guard Tour
disabled). The Guard Tour operates according to its configuration. Please refer to
Guard Tour Configuration manual for details.
Access Control Module This flag can be set to Yes to enable the Access Control Westinghouse package use
by LMSmodular. If Cerpass is used, this flag must be left = NO
Software Option from no.
22 to no. 32 - Not used
These software options are presently not used and reserved for future implementa-
tions.