User Manual

27
Fire & Security Products
Siemens Building Technologies
03.2003
10.2 Advanced
Field Values Meaning Notes
Video overlay
§ FAST SM2/MCI
§ Falcon
§ None
Radio pushbutton
It enables one of the following:
§ Fast Screen Machine II board
§ Falcon board (driver test is also
provided)
§ None of the above
Specific hardware is
required for video over-
lay. Contact Siemens
CCTV for more details
on the Falcon board
DDE
Add treatment flag to point
value
Check-box
If checked, LMS sends and expects
DDE point values including the CDSF
treatment flag: pvalue+treat*256
See CDSF documenta-
tion
LMSDLI Options
§ Packet support
§ Delay between phases
§ Delay after error
§ Check-box,
§ Delays in msec
§ Delays in msec
Tuning parameters for heavy traffic
application via GW. Default is:
§ Packet support checked
§ Delay between phases = 0
§ Delay after error = 0
Use default unless
different values are
recommended from
technical support
LMS Exit Options
§ Exit and Shutdown
§ Operator level
§ Check-box
§ LMS operator
access level,
0-9
If checked, the software closes the
Windows session upon leaving the
LMS program; this occurs as long as
the operator level is less than the
value indicated
Assuming the Operator
level set =6; level 0 to 5
will cause the Windows
session shutdown
when leaving LMS.