User Manual

58
Fire & Security Products
Siemens Building Technologies
03.2003
14 STATUS OF SECONDARY LINE 3
15 STATUS OF SECONDARY LINE 4
16 STATUS OF GW10 1
17 STATUS OF GW10 2
18 STATUS OF GW10 3
19 STATUS OF GW10 4
20 STATUS OF LINE 2 X25
21-30 SPARE 21-30
11.27 NK8223 (Type 15, Subtype 3)
No. Definition
1 GATEWAY CONNECTION STATUS
2 SUBSYSTEM OPERATING STATUS
3 INTERNAL CLOCK STATUS
4 DEVICE TEST STATUS (must be set out of scan)
5 TAMPER BOX
6 TAMPER REMOVAL (must be set out of scan)
7 I2C BOX
8 SUPPLY STATUS (must be set out of scan if DF8090 is not used)
9 BATTERY STAT US (must be set out of scan if DF8090 is not used)
10 STATUS OF LINE 1
11 STATUS OF LINE 2
12 STATUS OF LINE 3
13 STATUS OF LINE 4
14 DIGITAL INPUT 01 (must be set out of scan if no DF8040 is available on I2C)
15 DIGITAL INPUT 02 (must be set out of scan if no DF8040 is available on I2C)
16 DIGITAL INPUT 03 (must be set out of scan if no DF8040 is available on I2C)
17 DIGITAL INPUT 04 (must be set out of scan if no DF8040 is available on I2C)
18 DIGITAL INPUT 05 (must be set out of scan if no DF8040 is available on I2C)
19 DIGITAL INPUT 06 (must be set out of scan if no DF8040 is available on I2C)
20 DIGITAL INPUT 07 (must be set out of scan if no DF8040 is available on I2C)
21 DIGITAL INPUT 08 (must be set out of scan if no DF8040 is available on I2C)
22 DIGITAL INPUT 09 (must be set out of scan if no DF8040 is available on I2C)
23 DIGITAL INPUT 10 (must be set out of scan if no DF8040 is available on I2C)
24 DIGITAL INPUT 11 (must be set out of scan if no DF8040 is available on I2C)
25 DIGITAL INPUT 12 (must be set out of scan if no DF8040 is available on I2C)
26 DIGITAL INPUT 13 (must be set out of scan if no DF8040 is available on I2C)
27 DIGITAL INPUT 14 (must be set out of scan if no DF8040 is available on I2C)
28 DIGITAL INPUT 15 (must be set out of scan if no DF8040 is available on I2C)
29 DIGITAL INPUT 16 (must be set out of scan if no DF8040 is available on I2C)
30 DIGITAL OUTPUT 01 (must be set out of scan if no DF8020 is available on I2C)
31 DIGITAL OUTPUT 02 (must be set out of scan if no DF8020 is available on I2C)
32 DIGITAL OUTPUT 03 (must be set out of scan if no DF8020 is available on I2C)
33 DIGITAL OUTPUT 04 (must be set out of scan if no DF8020 is available on I2C)
34 DIGITAL OUTPUT 05 (must be set out of scan if no DF8020 is available on I2C)
35 DIGITAL OUTPUT 06 (must be set out of scan if no DF8020 is available on I2C)
36 DIGITAL OUTPUT 07 (must be set out of scan if no DF8020 is available on I2C)
37 DIGITAL OUTPUT 08 (must be set out of scan if no DF8020 is available on I2C)
38 GW10-GW22 LINE STATUS
39 LMS LOCAL LINE STATUS (must be set out of scan)
40 STATUS OF LMS GEOGRAPH. LINE 1 (must be set out of scan)
41 STATUS OF LMS GEOGRAPH. LINE 2 (must be set out of scan)
42 STATUS OF LMS GEOGRAPH. LINE 3 (must be set out of scan)
43 STATUS OF LMS GEOGRAPH. LINE 4 (must be set out of scan)
44 SPARE (must be set out of scan)
45 SPARE (must be set out of scan)
46 STATUS OF LINE 5
47 STATUS OF LINE 6
48 SPARE (must be set out of scan)
49 SPARE (must be set out of scan)
50 SPARE (must be set out of scan)