User Manual

72
Fire & Security Products
Siemens Building Technologies
03.2003
12.9 CMX/CF-9003
Code no. Code description Parameter
0 CMX STATUS REQUEST /NCRS
1 COMMAND 1
2 COMMAND 2
3 SET OUTPUT OFF output
4 SET OUTPUT ON output
5 SET ALL OUTPUTS OFF
6 SET ALL OUTPUTS ON
7 COMMAND 7
8 COMMAND 8
9 SET TEMPOR.OUTP.OFF output, time
10 SET TEMPOR.OUTP.ON output, time
11 SET INPUT TO AUTO input
12 COMMAND 12
13 ACK. DIGITAL INPUT input
14 ACK. ANALOGIC.BLOCK input
15 RESET DIGITAL INPUT input
16 RESET ANALOG. BLOCK block number
17 ACK. DIGITAL OUTPUT output
18 RES. DIGITAL OUTPUT output
19 SET OUTPUT TO AUTO output
12.10 CDSS, WIDE CDSS
(Cerberus Dati Standard Subsystem, CDDL/CDSF protocol, generic structure)
Code no. Code description Parameter
0 REQUEST SUBSYSTEM STATUS
1 ACK 0 or point no. (see 2.4.3)
2 RESET 0 or point no. (see 2.4.3)
3 … 30 SPARE
12.11 STT-10
Code no. Code description Parameter
0 STT STATUS REQUEST
1 ACKNOWLEDGE
2 RESET
3 ACK CTRL. UNIT FAULT
4 ACK. TECNO FAULT
5 ACK.TECNO STATUS
6 DISACTIVATE
7 ACTIVATE
8 SET TECH. OUTPUT OFF output no.
9 SET TECH. OUTPUT ON output no.
10 EMERG.EXIT HORN ON
11 EMERG.EXlT HORN OFF