User Manual

73
Fire & Security Products
Siemens Building Technologies
03.2003
12.12 STT-11
Code no. Code description Parameter
0 STATUS REQUEST
1 GENERAL ACKNOWLEDGEMENT
2 GENERAL RESET
3 – 11 RESERVED
12 SET FUNCTION IN AUTOMATIC funct#
13 SET FUNCTION IN MANUAL funct#
14 SET FUNCTION IN TEST funct#
15 INCLUDE FUNCTION funct#
16 EXCLUDE FUNCTION funct#
17 ACTIVATE FUNCTION funct#
18 INCLUDE INPUT Rel. Point
19 EXCLUDE INPUT Rel. Point
20 INCLUDE OUTPUT Rel. Point
21 EXCLUDE OUTPUT Rel. Point
22 ACTIVATE OUTPUT Rel. Point
23 DISACTIVATE OUTPUT Rel. Point
12.13 SE422
Code no. Code description Parameter
0 STATUS REQUEST
1 GENERAL ACKNOWLEDGE
2 GENERAL RESET
3 DISARM BUILDING
4 ARM BUILDING
5 LIMIT BUILDING
6 SILENCE LATCH. ALARM
7 SHUNT PROTECTION device #
8 UNSHUNT PROTECTION device #
9 RESET PROTECTION device #
10 SHUNT CU UPS
11 UNSHUNT CU UPS
12 RESET CU UPS
13 UNLOCK DOOR door #
14 UNLOCK DOOR TEMP. door #
15 RELOCK DOOR door #
16 SHUNT DOOR door #
17 UNSHUNT DOOR door #
18 RESET DOOR door #
19 RESET LAST TRANSIT door #
20 SHUNT DEVICE device
21 UNSHUNT DEVICE device
22 SHUNT MONITOR device, monitor
23 UNSHUNT MONITOR device, monitor
24 RESET MONITOR device, monitor
25 ACTIVATE OUTPUT device, output
26 DEACTIVATE OUTPUT device, output
12.14 Guard Tour
Code no. Code description Parameter
0 NOT USED
1 ACKNOWLEDGEMENT tour
2 RESET tour
3 SET RANDOM MODE
4 SET MANUAL MODE
5 LOAD NEW CONFIGUR.
6 START TOUR tour
7 STOP TOUR tour
8 SUSPEND TOUR tour
9 RESUME TOUR tour
10 EXCLUDE STATION station
11 INCLUDE STATION station
12-15 COMMANDS 12-15 (Reserved for future implementation)