User Manual

78
Fire & Security Products
Siemens Building Technologies
03.2003
12.22 CDSS
(Cerberus Dati Standard Subsystem, CDDL/CDSF protocol, specific implementations)
Code no. Code description Parameter
0 STD STATUS REQUEST
1 STD ACKNOWLEDGE
2 STD RESET
12.23 CC-30 CerPass
Code no. Code description Parameter
0 STATUS REQUEST
1 ACKNOWLEDGE
2 RESET
3 SET DATE & TIME
4 KEEP ACTIVE Door number, 1-8
5 KEEP OPEN Door number, 1-8
6 KEEP CLOSED Door number, 1-8
7 RESET ENTRY/EXIT READER Entry/exit reader, 1-8
8 SOFTWARE RESET FOR
MOVEMENT ALARMS ON Entry/exit reader, 1-8
ENTRY/EXIT READER, IT
ACTS ON ONE ACTIVE FIELD
AT THE TIME (LATCH RESET).
9 RESET TAMPER ON DC
10 RESET DOOR ALARM
12.24 DMS 7000
Code no. Code description Parameter
0 STATUS REQUEST
1 GENERAL ACKNOWLEDGEMENT (3+4+6)
2 RESERVED
3 POWER SUPPLY ACKNOWLEDGEMENT
4 EXTERNAL CLOCK ACKNOWLEDGEMENT
5 EXTERNAL EQUIPMENT ACKNOWLEDGEMENT External equipment 1-2
6 SERVICE PORT ACKNOWLEDGEMENT
7 GENERAL OUTPUTS ACKNOWLEDGEMENT
8 ACTIVATE OUTPUT Output, 1-576
9 DEACTIVATE OUTPUT Output, 1-576
12.25 Transliner
Code no. Code description Parameter
0 STATUS REQUEST
1 ACKNOWLEDGEMENT
2 RESET
3 RESERVED
4 ADDRESSING UNIT SWIT CH OFF Adr unit, 1-512
5 ADDRESSING UNIT SWIT CH ON Adr unit, 1-512
6-11 RESERVED
12 SECTION SWITCH OFF Section, 1-32
13 SECTION SWITCH ON Section, 1-32
14-21 RESERVED
22 DETECTION INPUT SWIT CH OFF Detection input, 1-1536
23 DETECTION INPUT SWIT CH ON Detection input, 1-1536